Dyed Skateboard Veneer Guide

Color Within the Wood

Dyed veneer is used to introduce color while retaining the natural grain and character of wood. It can be placed on a visible face, used within a laminate to create colored ply lines, or combined with natural veneer for a specific visual effect.

Natural Variation Remains Visible

Dye does not turn wood into a uniform plastic color. Grain direction, density, figure, mineral content, initial wood tone, surface condition, and processing influence how each sheet accepts color. Variation within a sheet and between sheets is normal.

Screen Color Is Not an Exact Standard

Photographs and screen previews are affected by lighting, camera settings, editing, monitor calibration, and surrounding colors. A digital image should be treated as a general representation. Order a sample when color is critical.

Handling Dyed Veneer

• Keep dyed sheets separated from light-colored material when transfer is a concern.
• Use clean gloves or clean hands during sorting and layup.
• Protect worktables, rollers, cauls, and press surfaces from loose color or contamination.
• Test compatibility with adhesive, coatings, ink, clear finish, and sanding processes.
• Expect sanding to change surface color if material is removed.

Color After Pressing and Finishing

Adhesive, pressure, heat, sanding, printing, clear coat, and other finishes can change the visible color. A clear finish may deepen tone and contrast. Always test the actual finishing schedule on the selected material.

Matching Separate Orders

Exact matching between different production lots or orders cannot be assumed. For one project requiring closer visual consistency, purchase enough material at one time and request matching consideration before ordering.

Custom Colors

Custom dye work may require a sample, minimum quantity, additional lead time, and written approval of an acceptable color range. Provide a physical color reference when practical; a screen screenshot alone is not a reliable production standard.